Filter
Top Products
P
When the standing time IS over. you WIII
hear a beep and the first cooking cycle
will start
d
count
own
The Display counts down the time to S~CW
how much time IS left in the first cookiig
cycle
For 2 of every 10 seconds, the Display ‘VVIII
show the Cook Power you selected if you
are using a Cook Power other than high.
P
When the first cooktng cycle ends you w1l1
iear a beep
The second cooktng cycle WIII star1 iIf
only one cooklng cycle IS used you WIII
hear 4 beeps and the oven ‘&ill ston ]
---I
The COOK CYCLE 2 Signal Light wili be G?
during the second cookIng cycle The
COOK POWER Light wlli also be on if You
are using a Cook Power other than high
count
d
own
The Disp!ay counts down the time to show
how much cooking time IS lef-t in fne
second cycle
For 2 of every 10 seconds, the Display wili
show the Cook Power you selected If you
are using a Cook Power other than high.
When the last cooking cvcle ends (COOK
CYCLE 2 or 3). You will hear 4 beeps [You
can stop the beeping by opening the oven
door or touching CANCEL.) When the
beeping stops the Display will snow the
time of day
Standlng tlme provldes more even
To check or stlr foods between or
defrosting and cooking because It allows
during cycles:
food temperature to even out.
1. Open the door. The oven will shut off.
To sklp the automatic standlng time:
2. Check, stir or rotate the food.
l
Instruct the microwave oven to defrost in
3. Close the door.
DEFROST CYCLE and to cook in COOK
4. Touch START. The oven will go on from
CYCLE 2 or 3.
where it stopped.
13