Filter
Top Products
4.
Touch START.
d
count
OWll
Changing the cooking time
The oven will automatically cook at
high Cook Power.
The COOK Indicator Light will stay on to
show that the oven is cooking,
The display counts down the time to
show how much time is left in the first
cycle.
When the cooking time ends, “End”
will show on the Display and 4
beeps will sound. (You can stop the
beeping by opening the door or by
touching CANCEL.) “End” will remain
on the Display and a reminder tone
will sound every 30 seconds until
the door is opened or CANCEL is
touched. The Display will then show
the time of day.
Cooking time can be changed any time before touching START or during the cycle:
I. Touch COOK.
2. Touch numbers for the new time.
3. Touch START.
Cook will continue cooking for the new time
Cooking at lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slowerthe cooking. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS” Cookbook tell you, by number, which Cook Powerto use
Recipes in other books and magazines may tell you by name (HI. MED, LO, etc.) or
percentage (IO%, 50%, SO%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH
9 ~
90% of full power
8 =
80% of full power
7 ~ 70% of full power MED-HIGH
6 60% of full power
5 ~ 50% of full power MED
4 = 40% of full power
3
30% of full power MED-LOW
2 ~ 20% of full power
1 ~ lO%offull power LOW
0 no power (fan and light will be off)
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and
close the door.
2.
Touch COOK.
10