Filter
Top Products
4.
Touch START.
*EEP f&p BEEP BEEP
AUTO SENSOR operating hints
The oven automatically cooks
at a pre-set Cook Power for that
setting. The AUTO SENSOR
Indicator Light will stay on to show
that the oven is cooking the food.
Do not open the oven door
during this part of the cycle.
When you hear 2 beeps, the Display
will show and count down the
remaining cooking time. The oven
door can now be opened, if needed
When the cooking time ends, “End”
will show on the Display and 4
beeps will sound. (You can stop the
beeping by opening the door or by
touching CANCEL.) “End” will remain
on the Display and a reminder tone
will sound every 30 seconds until
the door is opened or CANCEL is
touched. The Display will then show
the time of day.
l
All AUTO SENSOR cooking categories have pre-set Cook Powers.
l
The COOK POWER Indicator Light does not come on during AUTO SENSOR.
l
No Cook or Temperature cycles can be used with AUTO SENSOR.
l
Auto Start may be used with AUTO SENSOR.
l
Quick Defrost and Keep Warm may be used with AUTO SENSOR.
l
“AS-#” will show on the Display until the oven calculates and counts down the remain-
ing cooking time, except ‘AS-I” which stops after the first part of the cooking cycle.
l
“Err” will show on the Display if the door is opened during the first part of AUTO SENSOR.
“Err” will also show on the Display if AUTO SENSOR malfunctions. Open the door and
touch CANCEL to clear the Display. Do not reset AUTO SENSOR. The food may over or
undercook. To finish cooking food, estimate the remaining cooking time. Reset the oven
using the COOK cycle and approximate Cook Power setting.
Cooking at high cook power
DO THIS...
1.
Put food in the oven and
close the door.
2.
Touch COOK.
3. Touch Number Pads for the
cooking time you want.
THIS HAPPENS...
The COOK Indicator Light will come on
and the Display will show four O’s
The Display will show the numbers you
touched in the order you touched
them. The example shows 1 minute, 30
seconds.