Filter
Top Products
Any new lime sefflng made while QUICK DEFROST Is opemllng wtll conttnue ihe
defrostlng at only 20% oi full power.
The best time to change the setting is near the end of the QUICK DEFROST Cycle.
l
Open the door.
l
Check the food with long-tined fork; if center area is hard frozen, set addltional time.
Remember that standlng lime Is necessary to complete detrosiing.
l
Close the door and touch START To continue the cycle if no additional time is needed
OR...
l
Touch in new instructions for additional defrosting time.
Cooking in more than one cycle at one or more cookqowers
For best results, some recipes call for one Cook Power for certain length of time, and another
Cook Power for another length of time. Your oven can be set to change from one to another
automatically,
DO THIS...
1. Put food in the oven and close
the door.
2. Touch COOK 1.
3. Touch Number Pads for the
cooking time you want in the
first cycle.
4. Touch COOK POWER. (If you
want the high Cook Power, skip
to step 6.)
5. Touch a Number Pad for the
Cook Power you want In the first
cycle.
THIS HAPPENS...
The COOK 1 Indicator Light
will come on and the Display will
show four O’s
‘The Display will show the numbers
you touched In the order you
touched them. This example shows
3 minutes, 25 seconds.
The COOK POWER Indicator Light will
come on and the Display will show
“P-HI”. This shows the oven is pre-
programmed to cook at full IHIGH)
power.
The Display will show what you
touched. This example shows you
touched Number Pad 6 for 60% of
full power.