Filter
Top Products
The Display counts down the time
d
to show how much time is left in the
CJWI-I
first cycle.
When the cooking time ends, “End”
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by openlng me door or by touching
*EEP *EEP BEE OfE
p P
CANCEL.) “End” will remain on the Dis-
play and a reminder tone will sound
every 30 seconds until the door is
opened or CANCEL is touched. The
Display will men show the time of day.
Changing the cooking tlme
Cooking time can be changed any time before touching START or during the cycle:
1. Touch COOK 1.
2. Touch numbers for me new time.
3. Touch START.
Cook 1 will continue cooking for the new time.
lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to
use. Recipes In other books and magazines may tell you by name (HI, MED, LO, etc.] or
percentage (10%. 50%, 80%, etc.).
The following chart gives me percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH 4 = 40% of full power
9 = 90% of full power 3 = 30% of full power MEPLOW
8 = 80% of full power 2 = 20% of full power
7 = 70% of full power MED-HIGH 1 = lO%offull power LOW
0 = TIMER (fan and light will be off)
6 = 60% of full power
5 = 50% of full power MED
DO THIS...
1. Put tood in the oven and close
the door.
2. Touch COOK 1.
3. Touch Number Pads for the
cooklng ttme you want.
THIS HAPPENS...
The COOK 1 Indicator Light will
come on and the Display will show
four 0’s.
The Display will show the numbers
you touched In the order you
touched them. This example shows
7 minutes, 30 seconds.