Filter
Top Products
7. Touch Number Pads tor the
cooking tlme you want in the
second cycle.
8. Touch COOK POWER. (If you
want the hlgh Cook Power, skip
to step 10).
9. Touch a Number Pad tor the
Cook Power you want In the
second cycle.
10. Touch START.
d
count
own
The COOK 2 Indicator Light will
come on and the Display will
show four 0’s.
The Display will show the
numbers you touched In the
order you touched them. This
example shows 4 minutes, 30
seconds.
The COOK POWER Indicator Light
will come on and the Display
will show “P-HI”. This shows
the oven is preprogrammed to
cook at full (HIGH] power.
The Display will show what you
touched. This example shows
you
touched Number Pad 4 for 40% of
full power.
When you touch START, the COOK1
Indicator Light will stay on
while the oven is cooking in
the first cycle. The COOK POWER
Indicator Light will be on if
you are using a Cook Power
other than high. All other
Indicator Lights will go off.
The Display counts down the
cooking time to show how much
time is left in the first cycle.
For 2 of every 10 seconds, the
Display will show the Cook
Power you selected, if you are
using a Cook Power other than
high.
conilnued on next page