Filter
Top Products
Coil Elements and Reflector Bowls
Removing
2. Lift the edge of the coil element opposite the
receptacle just enough to clearthe reflector
bowl.
/
3. Pull the coil element straight away from the
receptacle.
Replacing
1.
2. Line up opening in the reflector bowl with the
coil element receptacle.
3. Hold the coil element as level as possible
with the terminal just started into the
receptacle.
4. While pushing the coil element terminal into
the receptacle, lift a little on the edge of the
unit nearest the receptacle.
5. When the terminal is pushed into the recep-
tacleasfarasitwillgo,thecoilelementwillfit
into the reflector bowl
CAUTION: Reflector bowls reflect heat
back to the utensils on the coil elements.
They also help catch spills. When they are
kept clean, they reflect heat better and
look new longer. If a reflector bowl gets
discolored, some of the utensils may not be
flat enough, or some may be too large for
the coil element. In either case some of the
heat that Is meant to go into or around a
utensil goes down and heats the reflector
bowl. This extra heat can discolor it. See
Cooking Gulde for further information.
4. Lift out the reflector bowl
14