Filter
Top Products
23
There is interior moisture build-up
■
■■
■
Are the air vents blocked in the refrigerator?
Remove any objects from in front of the air vents. Refer
to the “Ensuring Proper Air Circulation” section for the
location of air vents.
■
■■
■
Are the door(s) opened often?
To avoid humidity build-up, try to get everything you
need out of the refrigerator at once, keep food organized
so it is easy to find, and close the door as soon as the
food is removed. (When the door is opened, humidity
from the room air enters the refrigerator. The more often
the door is opened, the faster humidity builds up,
especially when the room itself is very humid.)
■
■■
■
Is the room humid?
It is normal for moisture to build up inside the refrigerator
when the room air is humid.
■
■■
■
Is the food packaged correctly?
Check that all food is securely wrapped. If necessary,
repackage food according to the guidelines in the “Food
Storage Guide” section. Wipe off damp food containers
before placing in the refrigerator.
■
■■
■
Are the controls set correctly for the surrounding
conditions?
Refer to the “Setting the Controls” section.
■
■■
■
Was a self-defrost cycle completed?
It is normal for droplets to form on the back wall after the
refrigerator self-defrosts.
The doors will not close completely
■
■■
■
Are food packages blocking the door open?
Rearrange containers so that they fit more tightly and
take up less space.
■
■■
■
Is the ice bin out of position?
Push the ice bin in all the way.
■
■■
■
Are the pans, shelves, bins, or baskets out of
position?
Put the crisper cover and all pans, shelves, bins, and
baskets back into their correct position. See the “Crisper
and Crisper Cover” section for more information.
■
■■
■
Are the gaskets sticking?
Clean gaskets and then apply paraffin wax according to
the directions in the “Cleaning Your Refrigerator”
section.
■
■■
■
Does the refrigerator wobble or seem unstable?
Level the refrigerator. Refer to the “Door Closing and
Alignment” section.
■
■■
■
Were the doors removed during product installation
and not properly replaced?
Remove and replace the doors according to the
“Removing the Doors” section, or call a qualified service
technician.
The doors are difficult to open
■
■■
■
Are the gaskets dirty or sticky?
Clean gaskets according to the directions in the
“Cleaning Your Refrigerator” section. The gaskets are
dirty or sticky.