Filter
Top Products
OVEN TEMPERATURE
OVEN
CONTROL
SELECTOR
OVEN SIGNAL
RIGHT REAR
RIGHT FRONT
LIGHT
CONTROL KNOB
CONTROL KNOB
Using the surface units
PUSH IN
Turn to
setting.
Control knobs must be pushed in
before turning
them to a setting They
can be set anywhere between HI
and OFF.
Surface Unit Indicators
The solid dot In the surface unit
rndicator shows which surface unit
IS turned on by that knob.
Signal light
One of the signal lights WIII glow
when a surface unit is on.
Until you get used to the settings, use the following as a guide.
for best results,
start cooking at the high settings, then turn the control knob down to continue
cooking.
Use HI
to start
Use MED-HI
Use MED
Use MED-LO Use LO
to
foods cook-
to hold a
for gravy, to keep food keep food
ina; to brina rapid boil; to
warm until
lic.$ids to a-
try chicken
puddings cooking after
and icing; to starting it
ready to
boil
or pancakes.
cook large on a higher serve. Set the
amounts of setting. heat higher
vegetables or lower
CAUTION: The use of the HI setting for long periods of time
can damage surface units and discolor chrome reflector
/ tinue cooking. .
I
within the LO
band to keep
bowls. Start cookmg on HI and turn control down to con-
food at the
temperature
you want.
_
5