Filter
Top Products
5. When baking is done, turn both the
Oven Selector and Oven Tempera-
ture Control to OFF. The OVEN
HEATING Indicator Light will go off.
Adjusting the oven
temperature control
Does your oven seem hotter or colder
than your old oven? The temperature of
your old oven may have shifted gradu-
ally without you noticing the change.
Your new oven is properly adjusted to
provide accurate temperatures. But
when compared to your old oven, the
new design may give you different
results.
If, after using the oven for a period of
time, you are not satisfied with the tem-
perature settings, they can be adjusted
by following these steps:
Pull the Oven Temperature Control
Knob stralghl off.
Loosen the locking screws inside
the control knob. Note the position
of the notches.
To lower the temperature, move
the tooth a notch closer to LO. Each
notch equals about 10°F (5°C).
To raise the temperature, move
the tooth a notch closer to HI. Each
notch equals about 10°F (5°C).
Tighten the locking screws and
replace the control knob.
9