Filter
Top Products
Surface Units and Reflector Bowls
Removing
Burn and Electrical Shock Hazard
Make sure all surlace units are OFF before
removing surface units and reflector bowls.
Failure to do so can result in burns or
electrical shock.
1.
Turn off all surface units.
3. Pull the surface unit straight away
from the receptacle.
I. Lift the edge of the unit, opposite
the receptacle, just enough to
clear the element hold down clip
and the reflector bowl.
4. Lift out the reflector bowl. See
“Cleaning Chart” on page 24 for
cleaning instructions.
18