Filter
Top Products
Some Do’s Don’& and Hints (cont’d)
PLUG
5. Popcorn should be made only in a popper designed for microwave
use. Follow instructions received with the popper. The results are the
responsibility of the popcorn popper manufacturer.
6. Liquids heated in certain containers may overheat and flash into
vapor. Water can splash out of the container and make a loud noise.
This is not dangerous and will not harm the oven. You may wish to
avoid using such containers for heating liquids again.
7. DO NOT OVERCOOK POTATOES. At the end of the recommended
cooking time, the potatoes should be slightly firm. Wrap potatoes in
foil and set aside for five minutes. Potatoes will finish cooking while
standing.
Some potato varieties may cook faster than others. Overcooking may
result in poor flavor and texture and potatoes may scorch or flame.
8. Do not store utensils in the oven.
9. Use hot pads.. some utensils can be hot.
10. Do not block the vents. Normal exhaust from cooking is vented out
the top and back on RJM 7450. Depending on the food, exhaust may be
hot.
11. The inner door liner may appear wavy after the microwave oven has
been operated for a long time. This is normal.
Using the MEAL SENSOR*
Temperature Probe
The temperature probe helps you cook foods to the temperature you
set. The microwave oven turns off automatically when the probe
senses the temperature you set.
When you use the probe, you do not need to set a time. The recipes
include temperature settings.
To use the Probe:
1. Put the temperature sensor end of the MEAL SENSOR tempera-
ture probe into the food you are heating or cooking. It is important to
place % of the probe in the center of the thickest part of the food. The
oven may turn off too fast or too slow when using the probe if the
probe is placed near a bone. in fat, in an air pocket or away from the
center of the food. It may be rjecessary to relocate the probe and restart
the oven.
2. Place the food and the probe into the microwave oven. Plug the
probe into the side of the oven. Close the door.
3. Set Cook Power, if desired.
4. Turn the MEAL SENSOR control to the final cooking temperature.
5. Push Start button. The Probe indicator and the On indicator will
glow.
When the probe senses the final temperature, a buzzer will sound, and
the oven will turn off.
Remove the food and the probe from the microwave oven.
l Tm k.