Filter
Top Products
3. Touch Number
Pads for the cook-
ing time you want.
m
4.
Touch START.
d
count
own
The Display will show the
numbers you touched in
the order you touched
them. The example shows
1 minute, 30 seconds.
The oven will automati-
cally cook at high Cook
Power.
The COOK 1 Indicator Light
will stay on to show that the
oven is cooking.
The Display counts down
the time to show how much
time is left in the first cycle.
When the cooking time
ends, “End, will show on the
Display and 4 beeps will
sound. (You can stop the
beeping by opening the
door or by touching CAN-
CEL.) “End” will remain on
the Display and a beep
will sound every 30 sec-
onds (to remind you that
food is left in the oven) until
door is opened or CANCEL
is touched. The Display will
then show the time of day.
Changing the cooking time
Cooking time can be changed any time before touching START or
during
the cycle:
1. Touch COOK 1.
2. Touch numbers for the new time.
3. Touch START.
Cook will continue cooking for the new time.
Cooking at lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook
Power, the slower the cooking. Each Number Pad also stands for a different
percentage of Cook Power. Many recipes in your MICRO MENUSa Cookbook
tell you, by number, which Cook Power to use. Recipes in other books and
magazines may tell you by name (HI, MED, LO, etc.] or percentage (IO%, 50%,
80%, etc.).
continued on next page.