Filter
Top Products
5. Push the Delay Start Time pad. The time of
day with the colon flashing will show in the
display and START TIME will light up.
6. Use the Hour and Minute pads to set the
desired start time. Push the “up” (A) or
“down” (V) pad(s) until the correct time
shows in the display.
This example shows a desired start time of
2 o’clock. The oven will automatically shut off
at 2:30 (the set start time plus the set cook
time).
7. Push the Start/Enter pad. DELAY and BAKE
will light up in the display to show that the
oven is programmed to start at a later time.
NOTE: The display will show “door” and a
tone will sound once a minute for 5 minutes if
the door is latched when you try to bake/
roast.
You can change the temperature or time
settings any time after pushing the Start/Enter
pad by repeating just Steps 2 through 6.
8. When the start time is reached, a one-
second tone will sound and DELAY will go
off. The display will show the set cook time.
“Lo”“, HEAT, TIMED and BAKE will light up in
the display to show that the oven is heating.
The display will count down the baking/
roasting time in minutes.
9. When the baking/roasting time is corn
pleted, the oven will turn off automatically,
beep four times and “End” will show in the
display. You will also hear four 1 -second
tones every minute until you push the Off/
Cancel pad.
NOTE: To disable reminder tones, push and
hold the Cook Time pad for 4 seconds. To
reactivate tones, repeat this procedure.
22