Whirlpool RS696PXY Range User Manual


 
If You Need Assistance
Or Service
This section is designed to help you save the cost of a service call. Part 1 of this section outlines
possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell
YOU
what to do if you still need assistance or service. When calling our Consumer Assistance Center for help
or calling for service, please provide a detailed description of the problem, your appliance’s complete
model and serial numbers and the purchase date. (See page 2.) This information will help us respond
properly to your request.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any kind. Please
check the chart below for problems you can fix. It-could save you the cost of a service call.
1
PROBLEM POSSIBLE CAUSE
SOLUTION
Nothing will
The unit is not wired into a live
Wire the unit into a live circuit with proper
operate
circuit with proper voltage.
voltage. (See Installation Instructions.)
A household fuse has blown or a
Replace household fuse or reset circuit
circuit breaker has tripped.
breaker.
The oven will not You have not set the electronic
Refer to pages 14-27 for setting the
operate
control correctly.
electronic control.
You have programmed a
Wait for the start time to be reached.
delayed start time.
The surface units A household fuse has blown or a
Replace household fuse or reset circuit
will not operate circuit breaker has tripped.
breaker.
You are not setting the control
Push control knobs in before turning to a
knobs correctly.
setting.
Control knob(s) You are not pushing in before
Push control knob(s) in before turning to a
will not turn
turning.
setting.
The Self-Clean-
The range clock does not show
Reset clock to show the correct time of
ing cycle will not
the correct time of day.
day. (See page 12.)
operate
The Lock Lever is not in the
Move Lock Lever all the way to the right.
Clean position-all the way to the
right.
You have programmed a
Wait for the start time to be reached.
delayed start time.
continued on next page
37