The oven light
The Oven Light will come on when you open
the oven door. To turn the light on when the
oven door is closed, push the Oven Light
Switch on the control panel. Push the switch
again to turn off the light.
Electrical Shock Hazard
l Make sure oven and light bulb are
cool and power to the oven has been
turned off before replacing the light
bulb. Failure to do so could result in
electrical shock or burns.
l The bulb cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures. Because bulb
cover is made of glass, be careful not
to drop it. Broken glass could cause
injury.
To replace the oven light:
1. Unplug appliance or disconnect at the
main power supply.
2. Remove the glass bulb cover in the back
of the oven by pushing the wire holder to
the side and pulling out the glass cover.
3. Remove the light bulb from its socket.
Replace with a 40-watt appliance bulb.
4. Replace the bulb cover and snap the
wire holder in place. Plug in appliance or
reconnect at the main power supply.
NOTE: Make sure the oven light is off during
the Self-Cleaning cycle. Keeping the oven
light on will shorten bulb life.
31