Whirlpool SB160PEE Oven User Manual


 
34
PROBLEM
The cooling fan
does not shut off
after the Self-
Cleaning cycle is
completed
Cooking results
are not what you
expected
A tone sounds
and the display
shows F1 or F3
CAUSE
The electronic controls have not cooled enough. The fan will only
shut off after electronic controls have cooled. Canceling the Self-
Cleaning cycle will not turn off the cooling fan.
The oven is not level. (See Installation Instructions.)
The oven temperature seems too low or too high. See “Adjusting
the oven temperature control” on page 16 to adjust oven
temperature.
You did not preheat the oven before baking (if called for in
recipe).
The recipe you are using may need to be altered to improve the
taste or appearance of the food.
You are using a pan that is not the correct type or size. Refer to a
reliable cookbook or recipe for recommended pan type and size.
There is not enough air space around pan when baking. Allow
1
1
2 to 2 inches of air space on all sides of pan.
If broiling, you have not completely closed the oven door. The
broiler provides the best cooking results with the oven door
closed.
The electronic control has detected a fault condition. Press the
Cancel button to clear the display and stop the tones, then
attempt to reprogram the oven. If the fault recurs, record the fault
number shown on the display, press the Cancel button and
contact an authorized servicer.
TROUBLESHOOTING
If none of these items was causing your problem, see “Requesting Assistance or Service” on
page 35.