Filter
Top Products
Removing and replacing
your range
lf the range is removed after installation,
you must follow this procedure:
1. Remove storage drawer.
2 Shut off main gas supply valve to
range.
3. Disconnect electrical supply cord.
4. Disconnect downdraft ductwork from
fan motor
to transition.
(See Inetalla-
tion Inetructione.)
5. Disconnect the range from the main
gas supply lie. Make sure you do
Step 2 before disconnecting the gas
supply from the range.
6. Slide range forward to disengage
range from anti-tip bracket secured to
floor.
7. When reinstalling the range, follow the
directions given in the Installation
kl.structions.
IfYou Need Service Or Assistance
l
We suggest you follow
these steps:
1. Before calling for aeeietence -
Performance problems often resufl from
file things you can find and fk without
tools of any kind.
II nothlng operatee:
l
Is the gas turned on?
l
Is the power supply cord plugged into
a live circuit with the proper voltage?
(See Installation Instructions.)
l
Have you checked your home’s main
fuses or circuit breaker box7
l
Have instructions in this book been
followed?
l
Is the control knob set in the correct
position?
l
Is the flow of combustion an&or
ventilation air to the unit obstructed7
Do not obstruct airflow to and
around unit.
l
Recheck suspected defect.
tl the oven will not operate:
l
Is the Oven Selector turned to BAKE
or BROIL? lf Oven Selector is turned
to TIMED BAKE, wait until the start
time is reached.
l
Is the Oven Temperature Control
turned to
a
temperature setting?
l
Is the Cook Timer set correctly?
tf burner faile to light:
l
Is the range connected to electrical
power?
l
Have you checked your home’s main
fuses or circuit breaker bofl
l
Are burner ports clogged? See
page 25.
37