Filter
Top Products
F
PROBLEM
Burner flames
lift off ports,
are yellow, or
are noisy
when turned
Off
POSSIBLE CAUSE
Air/gas mixture is incorrect.
SOLUTION
Contact an authorized Whirlpool
service technician to check air/gas
mixture.
Burner makes Burner is wet from washing.
Let dry.
popping noise
when on
Control
knob(s) will
not turn
You are not pushing in
Push control knob(s) in before
before turning.
turning to a setting.
Cooking
results are
not what you
expected
The range is not level.
Level range. (See Installation
Instructions.)
The oven temperature seems
Adjust the oven temperature control.
too low or too high.
(See “Adjusting the oven tempera-
ture control” on page 14.)
The oven was not preheated
as the recipe calls for.
Preheat oven if called for in recipe.
The recipe you are using
Alter recipe as needed.
may need to be altered to
improve the taste or appear-
ance of the food.
The pans are not the type or
size recommended in the
recipe.
Refer to a reliable cookbook for
recommended pan type and size.
There is not proper air
circulation around pan
when baking.
Allow 1 ‘/z to 2 inches (4-5 cm) on all
sides of the pans for air circulation.
There must be a minimum space of
1 inch (3 cm).
Flame size does not fit the
cooking utensil being used.
When broiling, you have not
completely closed the broiler
drawer.
Adjust flame size to fit cooking
utensil.
Completely close broiler drawer.
The flow of combustion and/
or ventilation air to the range
is blocked.
Remove blockage to airflow to and
around range.
The display
is showing
“88:88”
There has been a power
outage.
Reset the clock. (See page 11.)
28