Filter
Top Products
38
TROUBLESHOOTING
WHEN SELF-CLEANING YOUR OVEN
PROBLEM
The Self-Cleaning cycle
will not work
CAUSE
•
You did not press the start/enter pad.
•
You have set a delayed start time. Wait for the start time to be reached or
cancel and reset the control.
COOKING RESULTS
PROBLEM
Cooking results are
not what you expected
CAUSE
•
The oven temperature seems too low or too high. See “Adjusting the oven
temperature control” on page 17 to adjust the oven temperature.
•
You did not preheat the oven before baking (if called for in the recipe).
•
You are using a pan that is not the correct type or size. Refer to a reliable
cookbook or recipe for the recommended pan type and size.
•
There is not enough air space around the pan when baking. Allow 1
1
⁄2
to 2 inches of air space on all sides of the pan.
•
The flame size does not fit the cookware being used.
•
When broiling, you have not completely closed the oven door.
•
The flow of combustion and/or ventilation air to the range is blocked. Make
sure nothing is blocking the middle front of the backguard.
•
The range is not level. (See the Installation Instructions.)
DISPLAY MESSAGES
PROBLEM
The display is showing
“PF”
“F” followed by a
number shows on
the display
CAUSE
•
There has been a power failure. Press the off/cancel pad to clear the
display, then reset the clock. (See page 12.)
•
Press the off/cancel pad to clear the display. If an “F” code appears again,
call for service. (See “If You Need Assistance or Service” on page 39.)
If none of these items are causing your problem, see “Requesting Assistance or Service” on page 39.