Filter
Top Products
Using your refrigerator
Temperaty Control
--
Ir *;-’ 1
.@
I.’
r -/L,
YI <aam
Air Control
Air Outlet
Power Savlng Control
Setting the controls.. .
Solve the refrigerator time to cool down com-
The Temperature Control is in the refrigerator and
pletely betore addlng food.
[This may take sev-
the Air Control is in the freezer section. When the era1 hours.)
refrigerator is plugged in for the first time...
These settings should be about tight for
normal household retrlgerator usage.
The controls will be set about right when milk or
juice IS OS cold as you like and when ice cream
is firm.
I, Set the TEMPERA-
TURE CONTROL to 3.
2. Set the AIR
CON-
DO not block the air outlet on the control panel.
TROL to 3.
Blocking it con slow the air movement needed to
keep temperatures at the level you set
Changing the control settings.. .
If you need to adjust temperatures In the refriger-
l
Adjust the Temperature Control first.
ator or freezer. use the settings listed in the chart
l
Wait at least 24 hours between adjustments
below.
l
Then adjust the Air Control, if needed.
CONDITION:
REASONS:
RECOMMENDED SETTINGS:
__.~__~I ---*
If Refrigerator
Door opened often
Temperature Control
4
Section is
Large amount of food added
Air Control
3
TOO WARM
Room temperature too warm
--
--.----
If Freezer
Door opened often
Temperature Control 3
Section is
Large amount of food added
Air Control
4
TOO WARM
Very cold room temperature
QUESTIONS?
(can’t cycle often enough)
^---
., call your
If Refrigerator
Controls not set correctly
Temperature Control
COOL-LINELB Section is
for your conditions.
Air Control :
service
TOOCOLD _.
--^
assistance
If ICE isn’t
Heavy ice usage
Temperature Control 3
telephone
MADE FAST ENOUGH
Very cold room temperature
Air Control
4
number
(can’t cycle often enough)
Ipage 15).
If BOTH SECTIONS
Door opened often
Temperature Control
are TOO WARM
Large amount of food added
Air Control
Very warm or very cold
room temperatures
Power Saving Control.. .
The Power Saving Control
on the Control Con-
sole operates elecfiic heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
1. Use the “OFF” set-
tmg when humidity
IS low.
2.
Use the “0N”setting
if moisture forms on
the outside of the
refrigerator.
5