Filter
Top Products
Adjusting meat pan temperature. . .
Removing freezer bin.. .
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator. This helps keep the
meat pan colder than the rest
of the refrigerator.
Set the control to let mote or
less cold air through.
Fcx proper air movement, keep the freezer bin in
place when the refrigerator is
operating.
To remove the bln:
l
Slide out to the stop.
l
Lift the front to clear the
stop.
l
Slide out the rest of the way.
To replace the bln:
l
Place bin on theslides.
l
Make sure the stops clea
Use Control to AdJust Meat Pan Temperatures
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavv food items.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out. ,
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing the crisper, meat pan
and covers.. .
0 Slide crisper and meat pan straight out to stop
l
Lift the front.
l
Slide the rest of the way out.
l
Replace in reverse order.
Clear the Cover.
Snap Back Into Place.
the front of the slides.
l
Slide bin in.
Removing freezer shelves.. .
l
Lift front sliahtlv.
I I
l
Lift back 03 su’poorts. G
l
Replace in reverse order.
Lltt the Front
Then the Back
l
Covers are held in place by two pegs at the back
and two notched tabs in front.
- Press front tabs out of the way.
-Lift cover front.
-Lift back off the pegs.
- Replace in reverse order.
6