Filter
Top Products
13
INSTALLATION INSTRUCTIONS
FRAMELESS INSTALLATION
U
nframed electric cooktop Models CT30EU
and CT36EU can be installed as a frameless
application, with the glass mounted on top of
t
he countertop surface. For countertop cut-out
dimensions, refer to the Installation Specifica-
tions illustration on page 10 for Model CT30EU
and page 11 for Model CT36EU.
UNFRAMED INSTALLATIONS
FLUSH MOUNT INSTALLATION
O
PTION 2:
F
or this flush mount installation,
the countertop cut-out will be the same size as
the outer edge of the glass top. It is recom-
m
ended that cooktop itself be used as the
template for the cut-out. Turn the cooktop over
and mark the opening using the glass top as a
template.
It will be necessary to attach L-shaped brackets
or cleats to the inner perimeter of the cut-out
to support the cooktop. The top edge of the
bracket can be no wider than
7
/8" (22) and will
be attached
5
/16" (8) below the surface of the
countertop. Refer to the illustration below.
Attachment of the brackets is up to the
installer's discretion, wherever enough coun-
tertop material is present.
For additional support in the cut-out area,
adhere scrap countertop material to the
bottom side of the countertop. Consult your
countertop supplier for the proper methods of
attachment.
7
/8"(22)
5
/16" (8)
L-Shaped
Brackets
Flush mount installation brackets