Filter
Top Products
9
Dimensions in parentheses are in
millimeters unless otherwise specified.
INSTALLATION INSTRUCTIONS
MULTIPLE COOKTOP INSTALLATION
If the framed electric cooktop is to be used
with any combination of additional cooktop
u
nits or modules with a filler strip, the cut-out
width is calculated by adding the correspon-
ding units' cut-out dimensions plus 1
1
/4" (32)
f
or each additional unit. Refer to the illustra-
tion below.
IMPORTANT NOTE:
For Model CT15E, the
cut-out width should be increased from 13
3
/8"
(340) to 14" (356) when installed with multiple
units.
IMPORTANT NOTE:
Unframed electric
cooktops Models CT30EU and CT36EU are not
designed to be installed in combination with
other cooktop units.
IMPORTANT NOTE:
When multiple units are
installed side by side, each unit must have its
own separate recommended electrical circuit.
2
1
/2"min
(64)
FRONT OF COUNTERTOP
19
1
/4"
(489)
CUT-OUT
DEPTH
29
1
/4" (743)
TWO MODULES WIDTH
44
1
/2" (1130) THREE MODULES WIDTH OR
44
1
/4" (1124) 30" COOKTOP AND ONE MODULE
59
3
/4" (1518) FOUR MODULES WIDTH OR
59
1
/2" (1511) 30" COOKTOP AND TWO MODULES OR
50
1
/4" (1276) 36" COOKTOP AND ONE MODULE
14"
(356)
CUT-OUT
WIDTH
Countertop cut-out dimensions for installation of multiple cooktops
ACCESSORIES
Optional acces-
sories are available
through your
Wolf dealer. To
obtain local dealer
information, visit
the Showroom
Locator section of
our website,
wolfappliance.com.
When two or more modules are installed
together, an integrated module filler strip
(
#802726) is recommended. If a 30" (762)
downdraft ventilation system is also installed,
an integrated module support for downdraft
v
entilation (#803386) is also required. Contact
your Wolf dealer for information on these
accessory components.