Filter
Top Products
Fitting the Continuous
Flow Attachment
(Sold separately)
11
Place the motor base facing you on a dry,
level surface.
22
Place the processing bowl onto the motor
base, the bowl will only sit correctly on the
base when the handle is positioned to the
right, see figure 1.
33
Rotate the handle clockwise to lock as
indicated by the graphics on the left side
of the motorbase, see figure 2.
44
Fit the spindle onto the drive shaft.
55
Fit the ejector disc over the spindle.
66
Fit the required disc for processing above
the ejector disc on the spindle.
77
Position the lid onto the processing
bowl, ensuring that the lid locks into place,
following lock directions on lid, see
figures 7 and 8.
88
Fit the Food Collector underneath the
processing bowl chute. The Food
Collector should fit alongside the food
processor and the opening of bowl should
be in line with the chute. See figure 21 for
the properly assembled unit.
Before Using the Continuous Flow Attachment
Wash the processing bowl with chute, ejector disc and food collector in
warm water using a mild detergent. dry each part thoroughly before use.
Before you assemble your Food Processor, ensure that the power cord
is unplugged.
figure 20
2221
Ensure that your food processor is unplugged from the electrical outlet
before cleaning.
Wipe the base and cord with a warm soapy cloth and wipe clean with
a damp cloth. Dry thoroughly. Do not use any abrasive cleaners or
scouring pads on the housing as this will damage the finish. Wash the
processing bowl, cover and all attachments (except motor base) in warm
water using a mild detergent (or see dishwasher instructions below).
Dry each part thoroughly before use.
Warning: Care must be taken when handling the metal blades as these
items are extremely sharp.
Dishwasher Use
All plastic components deteriorate through the prolonged use of a
dishwasher for cleaning. However all parts of your Food Processor are
tolerant to dishwasher use, (excluding the processor body). If using the
dishwasher place parts only on the top rack of your dishwasher.
Once your food processor and accessories have been cleaned and dried
thoroughly, store your food processor as outlined in the section “Storing
your Food Processor.”
Care and Cleaning
figure 21
FG_FoodProc Manual2 7/7/06 3:54 PM Page 23