Appetizers,
Salads and
Entreés
23 24
Using Your Mini Bowl
(Sold separately)
11
Place the motor base facing you on a dry, level surface.
22
Place the processing bowl onto the motor base, the bowl will only
sit correctly on the base when the handle is positioned to the right,
see figure 1.
33
Rotate the handle clockwise to lock as indicated by the graphics on
the left side of the motorbase, see figure 2.
44
Fit the spindle onto the drive shaft.
55
Place the Mini Bowl over the spindle of the food processor.
66
Place the Mini S-blade over the center shaft of the mini
processing bowl.
77
Position the lid onto the processing bowl, ensuring that the lid locks
into place, following lock directions on lid, see figures 7 and 8.
8 Plug the power cord into a 120V AC power outlet. Start processing
using the On/Off or Pulse buttons.
9 When processing is complete, unplug the power cord,
remove the Mini S-Blade from the mini bowl before removing
the processed food.
Note: You can store your ingredients in the Mini Bowl by placing the
Mini Bowl lid over the bowl and pressing the center of the lid until it
snaps into place. The lid of the Mini Bowl will not snap into place unless
the mini blade has been removed.
Before you assemble the Mini Bowl, ensure that the power cord is
unplugged.
FG_FoodProc Manual2 7/7/06 3:54 PM Page 25