Yorkville Sound YS 1088 Mixer User Manual


 
20
MICROMI
X
Specifications
Number of Channels
8
Mono Channel EQ
Low, Mid, High
Stereo Channel EQ
Low, High
Channel Effects
All Channels
Monitors Effects
Yes
Balance Controls
Ch. 5 - 8
Pan Controls
Ch. 1 - 4
Channel Overload Protection
no
Inputs - XLR (bal)
6
Inputs - 1/4"
8
Inputs - RCA (unbal)
1 Pair
Mute Switches
Global 1 - 6
Activity / Solo LED
no
Clip /Mute LED
All Channels
Phantom Power
48V + LED Indicator
Internal Effects
24 Bit stereo, 16 Effects with Parameter Pot
Auxiliary Sends
Effect - Monitor
Effects Send
Yes
Effects Return
Internal
Effects Return to Main
Yes
Effects Return to Monitor
Yes
Reverb / Effects Footswitch
Yes
Record Outputs
Stereo RCA Pair
Max Gain to Line Out -Mic Input (dB)
84
Max Gain to Line Out -Line Input (dB)
82
Master EQ -1 (type /Channels /Range - dB)
Graphic 9 band (160hz-6.3khz) +2 band Shelving
Monitor EQ -1 (type /Channels /Range - dB)
Graphic 9 band (160hz-6.3khz) +2 band Shelving
Main Outputs ( Line Level)
2 x 1/4inch TRS
Main Amp Inputs (Line Level)
2 x 1/4inch TRS
Monitor Outputs (Line Level)
1 x 1/4inch TRS
Outputs - Amp A - 1/4" Jacks
2
Outputs - Amp A - Speakon 4-pin
1
Outputs - Amp B - 1/4" Jacks
2
Outputs - Amp B - Speakon 4-pin
1
Mixer - Signal to Noise Ratio (dB)
105
Mixer - Frequency Response (Tone and EQ Flat,+/-2dB)
20 - 20,000
Mixer - Input Referred Noise to line out, @ 150 Ohms (dBv)
-119
Mixer THD (Main out w/ -10dB input)
0.01
Amp A - Power Output @ 8 ohms (0%1"THD, 1kHz)
250
Amp A - Power Output @ 4 ohms
300
Amp A - Power Output -other
200 @ 2 ohms
Amp B - Power Output @ 8 ohms (0%1"THD, 1kHz)
250
Amp B - Power Output @ 4 ohms
300
Amp B - Power Output -other
200 @ 2 ohms
THD - 1kHz (dB)
0.1
THD - 20Hz-20kHz (dB)
0.5
Hum and Noise (un / Aweight -dB)
-101 / -107
Typical crosstalk -1 kHz (dB)
better than -60db
Input Impedance - Bal/Unbal (ohms)
20k / 10k ohms
Input Sesitivity (Vrms Sine)
1.4
CMRR @ 60Hz (min/typ)
-37db / -60db
Max Votage Gain (dB)
29
Power Consumption (typ/max)
200VA / 600VA
Protection
Thermal, Short Circuit, Impedance Overload
Cooling
1 x 92mm Fan
Transformer Type
SMPS
Finish
Grey and Black Powder Coat
Chassis Construction
Steel and Aluminum
Rackmount
no
Other Features
Tiltback or Upright Wedge Angles
Dimensions (DWH, inches)
10.0 x 15.5 x 10.5
Dimensions (DWH, cm)
25.4 x 39.4 x 26.7
Weight (lbs/kg)
16 / 7.2