Filter
Top Products
29
· If the cooker is not equipped with
thermocouples on the burners, insert a small
slotted screwdriver into the hole on the tap
shaft and turn the screw to the right or left
until the burner flame is adjusted to minimum.
· If the cooker is equipped with thermocouples,
the screw is not located in the tap shaft, but
on the valve body.
· Reassemble the parts following the same
procedure in reverse.
Check that, when turning the knob quickly from
the maximum position to the minimum one, the
flame does not go out.
AFTER COMPLETION OF ANY REPAIRS,
ADJUSTMENTS OR CONVERSION THE
STATUTORY SAFETY TESTS MUST BE CARRIED
OUT.
Stick the label supplied with the
appliance (in the nozzles bag) onto the
rating plate in accordance with the gas
type utilised.
The grill burner always operates at maximum and
therefore no minimum adjustment is necessary.