Zanussi ZDS 699 EX Dishwasher User Manual


 
31
Fitting the vapour protection
Fit the adhesive protection foil onto the front part of
the worktop; along the entire width.
Noise protection
Adhesive noise protection ensures excellent noise
insulation. This should be fitted when the dishwasher
has been mounted in the recess and the height
adjusted.
Apply the protection as shown in the drawing, making
sure that the non-adhesive section reaches right down
to the floor.
Kitchen plinth adjustment
To allow correct opening of the door it is sometimes
necessary to cut the kitchen plinth. Refer to the cutting
table.
According to dimensions (a) and (b) as shown on the
figure, you will find on the following table the depth (x)
of the cut to be made on the plinth.
The dimensions (a) and (b) of the table are those most
frequently used in the kitchen furnitures.
INS71en
II61
II111
a
b
II15
600 mm
II21
170 160 150 140 130 120 110 100
136 131 125 118 110 100 93 85
135 131 125 118 110 102 92 85
137 132 125 118 110 102 94 85
138 134 128 120 110 104 95 85
139 130 124 115 105 98 88
138 129 120 110 100 90
135 125 115 105 95
90
75
75
75
75
78
80
85
/
/ /
/
40
50
60
70
80
90
100 / /
Height (a)*
Depth (b)*
X
X
600 mm
minimum
Dimensions of the cut on the plinth
(
*
) dimensions in mm