Filter
Top Products
19
Fitting the Hob into the Worktop
Carry out the building in of the hob as follows:
1. place the seals supplied with the
hob on the side edges of the cut
out, taking care that the seals
meet without overlapping;
2. place the hob in the cut out,
taking care that it is centred;
3. fix the hob with the relevant fixing
clamps and screws, as shown in
the diagram. When the screws
have been tightened, the excess
seal can be removed.
The edge of the hob forms a double seal
which prevents the ingress of liquids.
Seal