Filter
Top Products
28
2. Loosen the two screws using a Pozidrive
screwdriver.
3. Hold the door glass securely in place with
one hand before removing the screws
completely with the other hand.
4. Using both hands, gently tilt the top of the
door glass towards you; lift slightly to
disengage the locators from the two bottom
brackets.
5. Clean the outer and inner glass using hot
soapy water or hob cleaner may be used.
Do not use hob cleaner on the Stainless
Steel or painted finishes. Do not try to
clean the foil, which is inside the door. The
foil is there to help keep the door cool, if it
is damaged it will not work. Ensure that all
parts are well rinsed and thoroughly dried
before attempting to replace the outer door.
WARNING!
If the door glass panel becomes chipped or
has deep scratches the glass will be
weakened and must be replaced to prevent
the possibility of the panel shattering.
Please contact your local service force
centre who will be pleased to advise further.
To replace the outer door glass
1. Holding the oven glass with both hands,
gently place the locators into the holes of
the brackets at the bottom of the oven
door.
2. Push the top of the oven glass towards the
oven door; ensuring the screw location
holes line up.
3. Hold the glass in place with one hand and
insert the crosshead screws into the
location holes with the other hand. Give
the screws one turn to ensure the glass is
secure.
4. Tighten the screws positively with a
Pozidrive screwdriver before closing the
oven door.
WARNING!
Do not attempt to use the oven without the
glass being in place.
To clean the glass door panels
Clean the glass door panels using hot soapy
water, hob cleaner may also be used. Do not
use hob cleaner on the stainless steel or
painted surfaces. Ensure that all parts are well
rinsed and thoroughly dried before attempting to
replace the glass.