Filter
Top Products
10
To cancel the countdown
If you change your mind and want to cancel the
'Countdown', press the Selector Control button
until the 'Countdown' indicator neon
flashes then depress the decrease control
until 00:00 shows in the display. The
'Countdown' indicator neon
will continue to
flash for a few seconds and then return to the
time of day.
To set the oven timer control
Only the main oven can be automatically timed.
When using the timer control for the very first
time, it is advisable to let it operate while you
are at home. The display can be checked to
show that it is operating correctly and you will
feel confident to leave a meal to cook
automatically in the future.
To set the timer to switch on
and off automatically
1. Ensure the electricity supply is switched on
and that the correct time of day is displayed.
2. Set the oven control to the required function.
3. Place food in oven.
4. To set the length of cooking time. Press the
Selector Control button
until the 'Cook
Time' indicator neon
is illuminated.
5. Press the increase control
until the
required length of cooking time is displayed. If
necessary press the decrease control
until the correct time interval is achieved.
6. Release the buttons. The 'Cook Time'
indicator neon
will be illuminated.
IMPORTANT!
Remember, this must be completed within 5
seconds of first pressing the Selector Control
button.
7. To set the 'End Time'. Press the Selector
Control button
until the 'End Time'
indicator neon
flashes. Press the
increase control button
until the required
stop time is displayed. If necessary press the
decrease control
until the required time
interval is achieved.
8. Release the buttons. The 'Cook Time'
and 'End Time'
indicator neons will be
illuminated.
9. The function and temperature selected will
remain in the display.
IMPORTANT!
When the automatic timed period starts, the
heat indicator neon will flash untill the oven has
reached the desired temperature.
Heat and hold
This feature will keep food warm for up to 30
minutes after the end time has elapsed.
To activate heat and hold press the selector
control
and then the increase control
directly after you have entered the 'Endtime'
, and 00.30 will show in the display.
To set the timer to switch off
only
1. Ensure the electricity supply is switched on
and that the correct time of day is displayed.
2. Set the oven control to the required function.
3. Place food in the oven.