Filter
Top Products
50 electrolux
50
Demo mode
This mode is intended to be used in shops to
demonstrate the oven functionality without any power
consumption except the interior light, the display and
the fan. This function can only be switched on when
the appliance is first connected.
If there is a power failure, when the power supply is
restored again, the Demo function can only be switched
on if in the
display 12:00 and the symbol are
flashing automatically.
1.
Press the button for approximately 2 seconds.
An acoustic alarm will sound for a short time.
2.
Press the
and “ ”buttons at the same time.
A short acoustic alarm will be heard and the time
12:00
will appear in the display
(Fig. 19)
.
When the oven is switched on
the
symbol appears
in the display.
This means that the Demo function is
activated.
All oven functions can be selected.
The oven is not really working and the heating elements
do not switch on.
Switch off the oven and follow the procedure described
above to switch off the demo mode again.
The Demo function remains saved in the
programme in the event of a power failure.
Error code
The electronic programmer does a continuous diagnostic
check of the system. If some parameters are not
correct, the control unit will stop the activated functions
and it will show on the display the corresponding error
code (Fig. 20).
For further details, refer to chapter "Something not
working“.
B
Fig. 19
Fig. 20