Filter
Top Products
60 electrolux
60
Building-in
To ensure correct operation of the built-in assembly, the
kitchen cabinet and the recess for the built-in appliance
must have suitable dimensions. When the appliance is
fitted-in, there must be no open spaces left and it must be
closed on all sides by the kitchen furniture to prevent the
possibility of inadvertently touching “live” (current carrying)
parts of the oven. All parts ensuring such a protection,
including any covering panel (for instance, if the appliance
is installed at the end or at the beginning of a kitchen
counter) must be fastened in such a way as to prevent
removal of the same without the aid of some tool. This
appliance can be placed with its back and with one side
close to appliances or walls of higher height. The other
side, instead, must be placed close to furniture or
appliances, having the same height.
Overall oven dimensions (Fig. 26)
Building-in under a kitchen counter
The recess must have the dimensions shown in Fig. 27.
Before carrying out the building-in of the oven, connect it
to the hob (see corresponding chapter); then recess
completely the oven under the counter; open the oven
door and secure the oven to the kitchen cabinet .
Securing the oven to the cabinet (Fig. 28).
- Fit the appliance into the cabinet recess.
- Open the oven door and secure the oven to the
kitchen cabinet by placing the four distance holders
(A) in the holes provided in the oven frame and then
inserting the four wood screws (B)
550 M
IN
600
560 - 570
80÷100
Fig. 26
Fig. 27
Fig. 28