Filter
Top Products
www.zephyronline.com
Installation - Internal B lower
8
The internal blower kit consists of the blower
and capacitor box with wiring.
ATTENTION
The following are intructions for installing internal blower model CBI-600. For instructions on preparing for external
blower model CBE-1000 please turn to page “10”. Before installing, verify that motor spins freely.
1. Remove existing screws from blower
housing.
2. Attach capacitor box to blower housing
using the removed screws.
3. Attach motor connector to capacitor box
connector.
4. P osition internal ange over blower
housing.
5. Attach (4) 1/2” 5x15mm screws and (4)
10mm washers to hold ange to blower
housing.