18
Features & Controls - Touch Controls & Features
The standard Bae Filters are required to be cleaned frequently and as recommended in order to maintain blower
eciency. If improperly maintained, residue from cooking will sift though lters and cause damage to hood blowers
and other sensitive components; and possibly clog duct w ork and create a re hazard.
1. Blower On/O
By pressing , the blower is switched On and O.
2. Speed Selection
The 3 speed levels are selected by presing to decrease and to increase speed level. T he display indicates
level selected.
3. Delay O
This is used for programmed shut down of blower and lights 15 minutes after the function is activated. Press once,
a dot ashes in the lower right hand side of display indicating the function is on. The hood will completely shut down
in 15 minutes.
4. Lights On/O/Dim
Switch lights On and O by pressing key once. To dim lights, press again.
5. Advance Display Functions
Filters Clean Reminder (Bae):
After every 30 hours of use, the display will start ashing an reminding you to clean the bae lters from residue and
possible clogs.
www.zephyronline.com