Operational, Basic, and Advanced Parameters
A-69 41-001343-02 REV04 – 05.2014
SIP Basic, Per-Line Settings
The following parameters are SIP per-line settings. The value of "N" is 1 - 9 or 1-6 depending on your model phone.
SIP Per-Line Authentication Settings
Parameter –
sip lineN screen name
(N is a line number from 1 to 9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Used to display text on the screen of the phone. You may want to set this parameter to
display the phone user's name.
Format Text
Default Value Not Applicable
Range Up to 20 alphanumeric characters
Example sip line1 screen name: Joe Smith
Parameter –
sip lineN screen name 2
(N is a line number from 1 to 9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Used to display text on a second line on the screen of the phone.
Notes:
• If other status messages display on the phone, such as “Network Disconnected”, the
Screen Name 2 value does not display.
• Characters are allowed (such as “#”).
• If the text is longer than the display width, than the display truncates the text to fit the
display.
Format Alphanumeric characters
Default Value Not Applicable
Range Up to 20 alphanumeric characters
Example sip line1 screen name 2: Lab Phone
