10-33
Cisco IE 3010 Switch Software Configuration Guide
OL-23145-01
Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Configuring 802.1x Authentication
Configuring 802.1x Authentication
These sections contain this configuration information:
• Default 802.1x Authentication Configuration, page 10-34
• 802.1x Authentication Configuration Guidelines, page 10-35
• Configuring 802.1x Readiness Check, page 10-37 (optional)
• Configuring Voice Aware 802.1x Security, page 10-38 (optional)
• Configuring 802.1x Violation Modes, page 10-39 (optional)
• Configuring the Switch-to-RADIUS-Server Communication, page 10-42 (required)
• Configuring the Host Mode, page 10-43 (optional)
• Configuring Periodic Re-Authentication, page 10-44 (optional)
• Manually Re-Authenticating a Client Connected to a Port, page 10-45 (optional)
• Changing the Quiet Period, page 10-46 (optional)
• Changing the Switch-to-Client Retransmission Time, page 10-46 (optional)
• Setting the Switch-to-Client Frame-Retransmission Number, page 10-47 (optional)
• Setting the Re-Authentication Number, page 10-48 (optional)
• Configuring 802.1x Accounting, page 10-50 (optional)
• Enabling MAC Move, page 10-48 (optional)
• Enabling MAC Replace, page 10-49 (optional)
• Configuring a Guest VLAN, page 10-51 (optional)
• Configuring a Restricted VLAN, page 10-52 (optional)
• Configuring the Inaccessible Authentication Bypass Feature, page 10-54 (optional)
• Configuring 802.1x Authentication with WoL, page 10-56 (optional)
• Configuring MAC Authentication Bypass, page 10-57 (optional)
• Configuring NAC Layer 2 802.1x Validation, page 10-59 (optional)
• Configuring an Authenticator and a Supplicant Switch with NEAT, page 10-60
• Configuring 802.1x Authentication with Downloadable ACLs and Redirect URLs, page 10-61
• Configuring Flexible Authentication Ordering, page 10-64
• Disabling 802.1x Authentication on the Port, page 10-65 (optional)
• Resetting the 802.1x Authentication Configuration to the Default Values, page 10-66 (optional)
