Front Panel Operation
5-32
current clock setting will be displayed
on the LCD.
Press ENT for two seconds to change
the setting.
Parity Check
Press ▼ or ▲ to select a SCSI target,
then press ENT.
Choose “Parity Check," then press
ENT. The current clock setting will be
displayed on the LCD.
Press ENT for two seconds to change
the setting.
Disconnecting Support
Press ▼ or ▲ to select a SCSI target,
then press ENT.
Choose “Disconnect Support," then
press ENT. The current clock setting
will be displayed on the LCD.
Press ENT for two seconds to change
the setting.
Maximum Tag Count
Press ▼ or ▲ to select a SCSI target,
then press ENT.
Choose “Max Tag Count," then press
ENT. The current clock setting will be
displayed on the LCD.
Press ▼ or ▲ to change the setting,
then press ENT for two seconds to
change the setting.
SCSI Target
CHL=1 ID=0 ..
SCSI Target
CHL=1 ID=0 ..
SCSI Target
CHL=1 ID=0 ..
Parity Check
Enabled ..
Disconnect
Support Enabled
Max Tag Count:
Default( 32) ..
Max Xfer Narrow
Only ?
Disable
Parity Checking?
Disable Support
Disconnect ?
Tag Cur=32
Set to:Default ?
