Advanced Configurations
9-4
The cloning process will begin with a notification message:
Press [ESC] to view the current progress:
You may also quit viewing the status bar by pressing [ESC] to
return to the previous menu. Select the drive indicated as
“CLONING” by pressing [ENTER]. Select “Clone Failing Drive”
again to view the progress. You may identify the source drive and
choose to “View clone progress” or “Abort clone” if you happen to
have selected the wrong drive.
The cloning progress will be completed by a notification message as
displayed below:
You may press [ESC] to clear the notification message to see the
SCSI drives’ status after the cloning process. The source drive
(Channel 1 ID 5) remains as a member of logical drive “0,” and the
“stand-by” drive (Channel 1 ID 2, the dedicated/global spare drive)
has become a “CLONE” drive.
