Revision July 2008, EG03, SW V1.06 3-1
Chapter 3 Keypad and Start Up
3.1 Digital Keypad VFD-PU01
3.1.1 Description of the Digital Keypad
U
F
H
VFD-PU01
JOG
LED Display
Displa
frequenc
, current, volta
e
and error, etc.
Status Display
Displa
the driver's current status
Part Number
Left key
moves cursor to the left
RUN key
RUN
RESET
STOP
STOP/RESET
UP and DOWN Key
Sets the parameter
number and changes the
numerical data, such as
Master Frequency.
JOG
By pressing JOG key.
Initiates jog operation.
MODE
C
hanges between different
display mode.
Display Message Descriptions
Display the AC drive Master Frequency.
Display the actual operation frequency present at terminals U/T1, V/T2,
and W/T3.
Display voltage (V), Current (A), power factor and feedback signal (P)
Display the output current present at terminals U/T1, V/T2, and W/T3.
Display the AC drive forward run status.
The AC drive reverse run status.
Display the specified parameter setting.
Display the actual value stored within the specified parameter.
External Fault.
