MLC 104 Plus Series • Introduction
1-5
Using GC you can congure a single room controller, or create
a web-based remote monitoring system for hundreds of A/V
devices in multiple locations.
You may congure an MLC using GC without having the device
physically connected to the A/V network.
N
For MLC 104 IP Plus models, use Global Configurator
version 2.2 or later. For MLC 104 Plus models, use
version 2.5 or later. Update all PCs and devices running
earlier versions of GC.
System Requirements
The minimum system requirements for the PC on which you
install Global Congurator include:
• Intel
®
Pentium
®
III 1 GHz processor
• Microsoft
®
Windows
®
NT SP4, Windows 2000 SP2, or
Windows XP SP2
• Microsoft Internet Explorer
®
6.0 with ActiveX
®
enabled
N
If ActiveX is not enabled, you may get a prompt from the
browser, or you will see the “Please wait while the files are
loading...” message in the GlobalViewer control page.
• Microsoft Windows Script 5.6
• 512 MB of RAM
• 50 MB of available hard disk space
• A network connection with a minimum data transfer rate of
10 Mbps; however, 100 Mbps is recommended.
Installing Global Configurator
Global Congurator software is available free from Extron.
To download and install Global Congurator on your PC:
1. Go to www.extron.com
2. Click the Download tab.
3. Click the IP Link
®
Software icon.
4. Click the Global Configurator icon.
5. Click the Download Now button.
6. Complete the personal information form.
7. Click the Download GCSWxxxxx.exe button.
8. Follow the remaining system prompts.
