Garmin GPSMAP 695/696 Owner’s Manual
190-00919-00 Rev. D
54
GPS Navigation
OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex
Selecting an airport for review by identifier, facility name, or loca-
tion:
1)
From the Waypoint (WPT) Page, press the INFO Softkey.
2)
Press the FMS Joystick to activate the cursor.
3)
Turn the FMS Joystick clockwise to begin entering a waypoint identifier
(turning it counter-clockwise brings up the waypoint selection submenu -
press the CLR Key to remove it), or move the FMS Joystick to select the
facility name, or city field.
4)
Press the ENT Key.
If duplicate entries exist for the entered facility name or location, additional entries
may be viewed by continuing to turn the FMS Joystick during the selection process.
If duplicate entries exist for an identifier, a Duplicate Waypoints Window is displayed.
Press the ENT Key to move the cursor to the Duplicate Waypoints Window.
Waypoint Information Window-Duplicate Identifier
Duplicate Waypoints Window
Selecting a runway:
1)
With the Waypoint (WPT) Page displayed, press the INFO Softkey.
2)
Press the FMS Joystick to activate the cursor.
3)
Turn the FMS Joystick clockwise to begin entering a waypoint identifier for
the desired runway (turning it counter-clockwise brings up the waypoint
selection submenu - press the CLR Key to remove it), or move the FMS
Joystick to select the facility name, or city field.
4)
Press the ENT Key.
5)
Move the FMS Joystick to place the cursor in the ‘Runways’ Box, on the
runway designator.
