162
Software Fixes in Release K.11.12 - K.13.49
Release K.12.03
■ Crash (PR_1000392863) — Switch may crash when setmib tcpConnState is used, with a
message similar to:
NMI event SW:IP=0x0079f4a0 MSR:0x00029210 LR:0x006dca60
Task='eTelnetd' Task ID=0x8a7cbb0 cr: 0x20000042 sp:0x08a7c870
■ Daylight savings (PR_1000364740) — Due to the passage of the Energy Policy Act of
2005, Pub. L. no. 109-58, 119 Stat 594 (2005), starting in March 2007 daylight time in the United
States will begin on the second Sunday in March and end on the first Sunday in November.
■ DHCP (PR_1000397753) — A unicast DHCP request that has already been relayed by
another router is sometimes dropped.
■ Hang (PR_1000397964) — The switch appears to hang where all routing stops, the switch
cannot ping anything, even addresses configured locally.
■ Proxy-ARP (PR_1000393571) — Proxy-ARP sends responses to gratuitous ARPs.
■ Remote Mirroring/Trunking (PR_1000397196) — Remote mirroring configured on a
trunk does not restart after the switch is rebooted. Workaround: after a switch reboot,
reconfigure the trunk remote as a mirroring source.
■ RIP (PR_1000393366) — The switch does not process RIP (v2) responses containing
subnets with a classful subnet mask, when the receiving RIP switch has a connected VLSM
network defined that would fall within that classful range.
Release K.12.03
The following problems were resolved in release K.12.03 (not a general release)
■ CLI (PR_1000373443) — The CLI update command help text and confirmation message is
misleading and confusing.
■ Crash (PR_1000399448) — Changes to traffic monitoring settings may trigger the switch
to crash with a message similar to:
Software exception at ease_ctrl.c:575 -- in 'mEaseCtrl',
task ID = 0x8347161
■ Crash (PR_1000401664) — Use of the CLI command dir with a very large path name may
cause the switch to crash with a message similar to:
PC Data Storage (Bus Error) exception vector 0x300:
Stack Frame=0x08e54928 HW Addr=0x00b3eefc IP=0x0018a740
Task='mSess2' Task ID=00 fp: 0x00000000 sp:
■ Enhancement (PR_1000379804) — Historical information about MAC addresses that
have been moved has been added to the show tech command output.
