Control panel message Description Recommended action
Moving...
tray feed clutch
To exit press
Cancel Job key
The printer is executing a Component
Test and the component selected is Tray
Feed Clutch.
No action necessary.
No job to cancel The C
ANCEL
J
OB
button was pressed, but
there is no active job or buffered data to
cancel. This message is displayed for
approximately two seconds before the
printer is returned to the Ready state.
No action necessary.
NON HP CARTRIDGE
DETECTED
A new cartridge has been installed that is
not made by HP. This message is
displayed until an HP cartridge is
installed or C
ANCEL
J
OB
is pressed.
If you believe you purchased an
HP cartridge, please call the HP fraud
hotline at 1-877-219-3183.
Any printer repair required as a result of
using non-HP cartridges is not covered
under HP warranty.
To continue printing, press C
ANCEL
J
OB
.
The first pending job will be cancelled.
NON HP CARTRIDGE
IN USE
alternates with
Ready
For menus press
The printer has detected that a non-
HP print cartridge is currently installed.
If you believe you purchased an
HP cartridge, please call the HP fraud
hotline at 1-877-219-3183.
Any printer repair required as a result of
using non-HP cartridges is not covered
under HP warranty.
ORDER <COLOR>
CARTRIDGE
alternates with
To continue press
The identified print cartridge is nearing
the end of its useful life and the
SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP. Override by
pressing
.
1. Order the identified print cartridge.
2. Press
to continue.
3.
Press
for detailed information.
4. Press
and to step through the
instructions.
5.
To exit help, press
.
Supplies ordering information is also
available from the embedded Web
server. See
Using the embedded Web
server for more information.
122 Chapter 8 Problemsolving ENWW
