A SERVICE OF

logo

7. If the paper is wrapped around the fuser roller or stuck in the rollers, grasp the paper by
both corners and pull down.
Note
If the paper is wrapped around the roller, it is important to pull down on the paper to remove
it. Pulling up on the paper can damage the fuser rollers and cause print quality problems.
WARNING!
Do not reach into the fuser until it has cooled.
Note
If the paper tears, make sure that all paper fragments are removed from the paper path
before resuming printing.
8. Firmly push the two green levers on either side of the fuser to re-engage the fuser rollers.
156 Chapter 8 Problemsolving ENWW