16
NS-51P680A12/NS-59P680A12
www.insigniaproducts.com
Using composite video (good)
To connect a DVD or Blu-ray player using
composite video:
1 Turn off your TV and all connected equipment.
2 Connect an A/V cable (not provided) between
the AV IN 1 (Y/VIDEO) and AV IN 1 R-AUDIO-L
jacks on the back of your TV and the AV OUT
jacks on the DVD or Blu-ray player.
3 Turn on your TV, then turn on the DVD or Blu-ray
player.
4 Press INPUT one or more times to select AV.
Connecting a VCR
To connect a VCR:
1 Turn off your TV and all connected equipment.
2 If the antenna or cable TV cable is connected to
your TV, disconnect the cable from your TV.
3 Connect the antenna or cable TV cable to the
ANT IN jack on the VCR.
4 Connect a coaxial cable (not included) between
the ANT IN jack on the back of your TV and the
ANT OUT jack on the back of the VCR.
5 Connect a video cable (not included) between
the AV IN 1 (Y/VIDEO) jack on the back of your
TV and the VIDEO OUT jack on the VCR.
6 Connect an audio cable (not included) between
the AV IN 1 R-AUDIO-L jacks on the back of
your TV and the AUDIO OUT jacks on the VCR.
7 Turn on your TV, then turn on the VCR.
8 Press INPUT one or more times to select AV.
Note
When you connect the audio using the R-AUDIO-L
jacks, the audio output is analog.
Note
The AV IN 1 Y/VIDEO (composite video) jack shares
the audio jacks with the COMPONENT IN 1 jacks.
Back of TV
DVD or Blu-ray player
Cables are often color-coded to
match color-coded jacks.
Note: The yellow connector on
the video cable plugs into the
bottom green Y-VIDEO jack.
A/V cable
Note
If the VCR is a “mono” (non-stereo) VCR, use a
Yconnector to connect to the AV IN 1 R-AUDIO-L
jacks of the TV, or connect the audio cable to the
AV IN 1 R jack.
Back of TV
From ANT OUT on VCR to
ANT IN on back of TV
Video cable
Audio cable
Note: The yellow connector on
the video cable plugs into the
green AV IN 1 (Y/VIDEO) jack
on the back of your TV.
Note: The coaxial cable
connects to the ANT OUT jack
on the VCR to the ANT IN jack
on the back of your TV.
