Responsibilities 1 General Information
4 User Manual RKP-II (CA53461-001; Version 1.0, 10/07) © 2007 Moog GmbH
1.4 Responsibilities
Responsibility of the
manufacturer and that of
the operator of the
machinery
The manufacturer and the operator of the machinery are both responsible to
see that the planning and execution of the work performed with and to the
radial piston pump as well as all interactions with the radial piston pump are
carried out in accordance with the instructions given in this User Manual and in
the relevant supplemental documentation for each respective application.
The manufacturer and the operator of the machinery are responsible in detail
for the following:
• Staff selection and training
Ö Chap. "2.2.2 Selecting and Qualifying Staff", Page 8
• Intended use
Ö Chap. "2.1 Intended Use", Page 7
• Safe operation
Ö Chap. "2.2.1 Safe Operation", Page 8
• Taking required work safety measures for the respective application and
monitoring
Ö Chap. "2.2.4 Work Safety", Page 9
• Observing the relevant manufacturer's safety standards and those of the
operator of the machinery for each respective application
• Observing the relevant regulations applicable nationally and
internationally, as well as applicable standards and directives (such
as, e. g., EU Machine Directive and the regulations by the Employer's
Liability Association, TÜV or VDE) as amended in their current version
when designing, assembling and operating the machinery with all of the
installed components.
• Installing a suitable safety system for limiting the pressure in the hydraulic
connections
Ö Chap. "2.3.2.1 Safety Devices for Limiting Pressure", Page 10
• Using only radial piston pumps in technically flawless condition and safe
for operation
• Preventing unauthorized structural modifications, repairs and
maintenance work to be carried out or such that are unprofessionally
performed.
Ö Chap. "2.2.3 Structural Modifications", Page 9
Ö Chap. "10 Spare Parts, Accessories, Repairs", Page 57
• Defining and adhering to application specific inspection and servicing
instructions
• Adhering to all technical data during storage, transport, assembly,
disassembly, connecting, start-up, configuring, operating, cleaning,
repairing or performing any troubleshooting, especially the ambient
conditions as well as to the data of the hydraulic fluid in use.
• Proper storage, transport, assembly, disassembly, connection, start-up,
configuration, operation, cleaning, repairing, performing any
troubleshooting or disposal
• Easily accessible and available safe keeping of the
• Manual as well as the relevant supplemental documentation for each
respective application.
Ö Chap. "1.1.4 Safe Keeping", Page 1
• This User Manual and the relevant supplemental documentation for each
respective application are to be added to the User Manual of the
machinery.
