16
Chapter 2 Settings and Adjustments
2-6 Power Indicator/EIZO Logo Display
Settings
●
To turn off the Power indicator while a screen is displayed
[Power Indicator]
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from the Adjustment menu, and press
.
(2)
Choose <Power Indicator> from the <Others> menu, and press
.
The <Power Indicator> menu appears.
(3) Select “Disable” with or , and press .
The Power Indicator setting is completed.
●
To display EIZO logo [EIZO Logo Appearing Function]
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
[Procedure]
(1) Press
to power off the unit.
(2) Press again while pressing .
The EIZO logo does not appear on the screen.
[Resetting]
(1) Press to power off the unit.
(2) Press again while pressing .
The logo appears again.
2-7 Locking Buttons
●
To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be
locked
• (Enter button) Adjustments/settings using
Adjustment menu
Buttons that cannot
be locked
•
-/$%
FineContrast mode selection/adjustment using
control buttons
•
/ Brightness adjustment using control buttons
• (Input Signal Selection button),
-/$%
(Mode button),
(Power button).
(1) Press to turn off the unit.
(2) Press again while pressing
-/$%
.
The screen is displayed with the adjustment lock.
[Unlocking]
(1) Press to turn off the unit.
(2) Press again while pressing
-/$%
.
The screen is displayed with the adjustment lock released.
NOTE
• The Power indicator lights up at
power on with the default setting.
NOTE
• The logo appears with the default
setting.
SX3031W_UM_EN.indd 16SX3031W_UM_EN.indd 16 5/29/2007 1:46:06 PM5/29/2007 1:46:06 PM
