Ring Groups
Aspire Software Manual Features ◆ 491
➻ 22-05-01 : Incoming Trunk Ring Group Assignment
Assign trunks to ring groups.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➻ 22-08-01 : DIL/IRG No Answer Destination
For DIL Delayed Ringing, assign the DIL No Answer Ring Group. An unanswered DIL rings
this group after the DIL No Answer Time (Program 22-01-04) expires. DIL Delayed Ringing
can also reroute outside calls ringing a Ring Group, In-Skin/External Voice Mail, or Central-
ized Voice Mail.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➻ 22-12-01 : DID Intercept Ring Group
For each DID Translation Table, assign the destination for DID Intercept. The destination can
be a Ring Group, In-Skin/External Voice Mail, or Centralized Voice Mail. For each table,
make a separate entry for each Night Service mode.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➻ 25-03-01 : VRS/DISA Transfer Ring Group With Incorrect Dialing
Set the transfer destination for each DISA and Automated Attendant (OPA) trunk. The destination
can be a Ring Group or Voice Mail. Make a separate entry for each Night Service mode.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
Note: For incoming calls, Ring Group programming (22-04/22-05) overrides Access Map
programming (14-07/15-06).
Use the charts below to program the following example:
1
Trunks ring the same in the day as at night.
For this extension . . .
1
301 Trunk 1 rings Trunk 2 flashes Trunk 3 flashes
302 Trunk 1 flashes Trunk 2 rings Trunk 3 flashes
303 Trunk 1 flashes Trunk 2 flashes Trunk 3 rings
Program 22-04 : Incoming Extension Ring Group Assignment
Ring Group
1
>
123
Trunk 1 X - -
Trunk 2 - X -
Trunk 3 - - X
X = Trunk assigned to indicated Ring Group
1
Make the same 22-05 entry for all Night Service modes.
Program 22-05 : Incoming Trunk Ring Group Assignment
Ring Group
>
123
Ext. 301 1
0
1
0
1
Ext. 302
0
1
1
0
1
Ext. 303
0
1
0
1
1
1 = Extension rings
0 = Extension doesn’t ring
1
To allow extension user to answer flashing line, be sure to give
extension incoming access to the trunk in Programs 14-07 and 15-06.
